Multipair Instrument Cables ESI 09-6 Issue 5

Applications

These light current control cables are intended primarily for use with control, indication and alarm equipment for switchgear and similar power apparatus in power stations and substations where the nominal voltage does not exceed 150V d.c. or 110V a.c.The cables are also suitable for telemetry applications where large conductor size are required. An optional collective aluminum tape screen can be provided. In case if the installation environment is prone to flooding or prolonged period of dampness, PE insulation should be considered as an alternative to PVC.

Construction

  Multipair Instrument Cables ESI 09-6 Issue 5

 

Conductor Solid tinned annealed copper, sizes: 1/0.9mm(0.64mm2) to BS6360
Insulation PVC (polyvinyl chloride) type 2 to BS7655
Pairing Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Colour code See technical information
Binder tape PETP transparent tape
Collective screen(optional) Aluminum/polyester tape is applied over the laid up pairs metallic side down in contact with a longitudinal 1/0.5mm to 1/0.8mm tinned copper drain wire
Bedding (for armoured cables) PVC (polyvinyl chloride) to type TM 1 or 6 to BS EN 50363-4-1
Armouring (for armoured cables) Galvanized steel wire armour
Outer sheath Black PVC (polyvinyl chloride) to type TM 1 or 6 to BS EN 50363-4-1

Electrical Properties

Maximum conductor temperature +70C
Minimum bending radius 6 x overall diamter
Minimum ambient temperature - 20C after installation and only when cable is in a fixed position

 

Voltage rating 150V d.c. or 110V a.c.
Test voltage 2Kv r.m.s. between conductors, 5Kv r.m.s. between all conductors and aromur
Maximum conductor resistance(loop) 59.34Ohm/km at 20 C
Minimum insulation resistance 80MOhm/km at 20 C
Maximum mutual capacitance 150Nf/km at 1 KHz
Flame retardancy BS 4066 part 1(IEC 60332-1) or BS 4066 part 3(IEC 60332-3)

Parameter

Unarmoured

Number of pairs Nominal diameter of conductor Nominal Conductor Cross-Sectional Area Insulation thickness Sheath thickness Diameter Under Armour Cable weight
no./mm mm^2 mm mm mm Kg/Km
UN-SCREENED CABLES 
2(Q) 0.9 0.64 0.3 1.3 5.7 45
5 0.9 0.64 0.3 1.4 9.4 115
10 0.9 0.64 0.3 1.5 13 205
20 0.9 0.64 0.3 1.6 16.8 380
30 0.9 0.64 0.3 1.7 19.9 570
50 0.9 0.64 0.3 1.9 25.4 920
100 0.9 0.64 0.3 2 35.5 1820
SCREENED CABLES
2(Q) 0.9 0.64 0.3 1.3 6.2 50
5 0.9 0.64 0.3 1.4 9.9 125
10 0.9 0.64 0.3 1.5 13.5 215
20 0.9 0.64 0.3 1.6 17.3 390
30 0.9 0.64 0.3 1.7 20.4 580
50 0.9 0.64 0.3 1.9 25.9 940
100 0.9 0.64 0.3 2 36 1850

armoured

Number of pairs Nominal diameter of conductor Insulation thickness Bedding Thickness Diameter Under Armour Diameter of armour wire Sheath thickness Overall diameter Cable weight
mm mm mm mm mm mm mm Kg/Km
UN-SCREENED CABLES
2(Q) 0.9 0.3 0.8 5.7 0.9 1.3 10.1 200
5 0.9 0.3 1 9.4 0.9 1.4 14.1 370
10 0.9 0.3 1.1 13 1.25 1.5 18.6 610
20 0.9 0.3 1.2 16.8 1.25 1.6 22.7 930
30 0.9 0.3 1.4 19.9 1.6 1.7 26.7 1390
50 0.9 0.3 1.6 25.4 1.6 1.9 32.6 1940
100 0.9 0.3 1.9 35.5 2 2 44.1 3700
SCREENED CABLES
2(Q) 0.9 0.3 0.8 6.2 0.9 1.3 10.6 220
5 0.9 0.3 1 9.9 0.9 1.4 14.6 380
10 0.9 0.3 1.1 13.5 1.25 1.5 19.1 630
20 0.9 0.3 1.2 17.3 1.25 1.6 23.2 955
30 0.9 0.3 1.4 20.4 1.6 1.7 27.2 1415
50 0.9 0.3 1.6 25.9 1.6 1.9 33.1 2000
100 0.9 0.3 1.9 36 2 2 44.6 3750
Contact Us

Add the link of current page.

Clear

Submit

Instant Messaging

WhatsApp :

+852 6230 0392

Skype :

Caledonian Cables

live:1cb87739a29fb08c

Wechat :
The personal information you enter is only used to reply to your message, It will not be leaked or used for other purposes.